System Parameter Settings
The calculator has several parameters which can be set and reset to different conditions. These parameters are affected when you reset the calculator, turn the calculator off and on, clear the calculator, or use the HELP function. The information in this table lists the effects of these actions on each parameter.
Parameter | Effect of[RESET]or[OFF][ON] | Effect of[ CLEAR ] | Effect of[ HELP ] { YES } |
---|---|---|---|
Display | cleared | cleared | cleared |
Display Format | standard | removes EE | standard |
Decimal Point | floating | no effect | floating |
Number base | decimal | no effect | decimal |
Memory Partitions | no effect | no effect | * |
Data registers | no effect | no effect | no effect |
Program registers | no effect | no effect | no effect |
File space | no effect | no effect | no effect |
Statistics Registers | no effect | no effect | no effect |
Temporary Register | cleared | no effect | cleared |
AOS™ Stack | cleared | cleared | cleared |
User Subroutine Stack | cleared | no effect | no effect |
Angle Mode | no effect | no effect | degrees |
Alpha Mode | reset | no effect | reset |
Alpha Registers | RPD-95 KEYPRO | no effect | no effect |
UC/LC alpha lock | uppercase | no effect | no effect |
Learn mode | reset | no effect | no effect |
Printer Device number | ** usually no effect | no effect | no effect |
Print width | *** usually no effect | no effect | no effect |
Word break | no effect | no effect | no effect |
Trace | off | no effect | no effect |
User flags | reset | no effect | resets flag 15 (HALT ON ERROR) only |
System Memory | protected | no effect | protected |
Halt on Error | off | no effect | off |
* - memory not used as file space is equally divided into program steps and data registers.
** - set to 12 if printer is attached.
*** - set to 24 if original device was not 12, but printer is attached now.
☚ Back