Starting a New Statistics Problem
When you start a new statistics problem that does not use any previously entered data values, being by clearing the statistics registers and selecting 1- or 2- variable statistics. Clearing the statistics registers does not affect any values stored in the calculator's data register memories. However, the t-register is cleared.
The Number of Variables
In 1-variable statistics, a data value is represented as xn, where n = 1, 2, ..., N. (N is the total number of data values).In 2-variable statistics, a data value is represented as (xn,yn). The x value is the independent variable, and the y value is the dependent variable.
Clearing the Registers
To clear the statistics registers and select 1- or 2- variable statistics, use the following procedure.- Press [ STAT ] to display the STAT FUNCTIONS function.
- Press { CLR }. The following menu is then displayed.
{ CS1 } - 1-variable statistics
{ CS2 } - 2-variable statistics - Select either 1- or 2- variable statistics.
After you press { CS1 } or { CS2 }, the STAT FUNCTIONS menu is displayed.
☚ Back