Polar/Rectangular Conversions
Selecting { P-R } from the CONVERSIONS menu performs polar/rectangular conversions. You can convert a pair of coordinates from the polar system to the rectangular system or vice versa. The t-register is used to store one of the two coordinates required for the conversion.
Polar to Rectangular Conversions
To convert from polar (r,Θ) to rectangular (x,y) coordinates:- Press [ CONV ] to display the CONVERSIONS menu.
- Use [ 2nd ] [ DRG ] to select the correct angle mode (degree, radian, or grad).
- Enter the r-coordinate and press [ x~t ] to store it in the t-register.
- Enter the Θ-coordinate.
- Press { P-R } to display the y-coordinate.
- Press [ x~t ] to display the x-coordinate.
Until you enter another number into the display, pressing [ x~t ] alternates between the x- and y- coordinates.
Rectangular to Polar Conversions
To convert from rectangular (x,y) to polar (r,Θ) coordinates:- Press [ CONV ] to display the CONVERSIONS menu.
- Use [ 2nd ] [ DRG ] to select the correct angle mode (degree, radian, or grad).
- Enter the x-coordinate and press [ x~t ] to store it in the t-register.
- Enter the y-coordinate.
- Press { P-R } to display the Θ-coordinate.
- Press [ x~t ] to display the r-coordinate.
Until you enter another number into the display, pressing [ x~t ] alternates between the r- and Θ- coordinates.
Example
Convert the rectangular coordinates ( x=5, y=6 ) to polar coordinates.Procedure | Press | Display |
---|---|---|
Clear display | [ CLEAR ] | |
Select Conversions Menu | [ CONV ] | |
Select degree mode | [ INV ] [ 2nd ] [ DRG ] | |
Enter x and y | 5 [ x~t ] 6 | |
Display Θ-coordinate | [ INV ] { P-R } | |
Display r-coordinate | [ x~t ] |
☚ Back